Best fuel pressure gauge information
1. SUPERFASTRACING Black Universal Adjustable Fuel Pressure Regulator Gauge 0-100psi Liquid Chrome
- 1 x Fuel Pressure Regulator Gauge , 1-3/4” | 45mm Gauge
- Liquid filled gauge for consistent readings hot or cold. Adjustable from 0 to 100 PSI to maximum fuel pump capacity
- Steel case, a crisp, easy to read black face with white numerals and PSI increments
- Standard, 1/8 inch NPT male supports a direct connection to any adjustable regulator
- Easy-Vent Plug for accurate readings every time.
2. JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV
- FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge’s low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system.
- CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15″L hose is used for hooking up directly to the 1/4″ SAE standard schrader valve on fuel pump, 8″L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles.
- FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2″ large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16″L fuel drain hose help to release pressure safely and recovery fuel easily. Blow molding case keeps everything in place and protects the gauges during storage.
- CHECK FUEL INJECTOR PUMP PRESSURE: The pressure tester is designed for checking fuel injection pump pressure and fuel flow easily and quickly. You can compare the pressure value to the manufacturer’s recommended reference range, aid to diagnose gasoline engine fuel system. Low fuel pressure can be caused by kink/leak/clog on inlet supply side components, a bad fuel pump or regulator, low tank pressure. High fuel pressure may be caused by a bad fuel pressure regulator or kinked outlet return line
- SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR fuel pump pressure tester gauge. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the kit fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us for help if overtime.
3. Aeromotive 15633 Fuel Pressure Gauge – 0 to 100 psi
- 5” Diameter 0-100 PSI Liquid Filled Includes integral pressure relief valve
- Includes integral pressure relief valve
- Liquid filled
4. MEASUREMAN 1-1/2″ Dial Size, Glycerin Filled Fuel Pressure Gauge, 304 Stainless Steel case, 0-15Psi, 3-2-3%, 1/8″NPT Back Mount
- For meausring fuel pressure
- 1-1/2″ dial size, 1/8″NPT Back
- Pressure range: 0-15psi single scale
- Stainless steel case, brass wetted parts
- Accuracy: +/-3-2-3%
5. JEGS Fuel Pressure Gauge | 1.5” Diameter | Liquid Filled | 0-100 PSI | Black Dial | 1/8 “ NPT Male Fitting | Black Case & Bezel
- 0-100 PSI READING for most fuel injected applications
- 1/8 “ NPT MALE THREADED FITTING to screw into your existing fuel system
- LIQUID-FILLED to slow down engine vibration of the needle
- BLACK CASE AND BEZEL for long life and great looks
- 1 1/2 “ DIAMETER BLACK FACE for compact viewing such as under the hood
6. Pindex Universal 1561 Fuel Pressure Gauge 0-15 psi White Face 1-1/2″ Diameter
- Universal fit.Accurately and reliably monitors fuel pressure
- Reads in half pound increments across a range from 0 to 15 pounds
- Empowers you to easily make changes with an adjustable fuel pressure regulator
- 1/8″ NPT Male Fitting,1-1/2″ In Diameter replacement number 1561
- Universal Application for cars,truck,off road,vans
7. GlowShift 3/8” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter – 1/8-27 NPT Sensor Port – 304 Stainless Steel – Fits Hose with 9.5mm ID Inner Diameter – Includes Clamps
- GlowShift 3/8” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter Allows Users to Install a Fuel Pressure Sensor to a 3/8″ Inner Diameter Fuel Line
- Features 3/8″ (9.5mm I.D) Barbed Push Lock Fittings, 1/8-27 NPT Port for Fuel Pressure Gauge Sensor & 2 Hose Clamps
- Manufactured from 304 Stainless Steel that Prevents Corrosion
- Includes Step-By-Step Installation Instructions
- GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support
8. Spectre Performance 59013 Fuel Pressure Gauge with Fitting
- Fits 3/8 inch fuel lines
- Specifically for carbureted engines
- Mounts under-hood in fuel line
- Includes a 0-15 PSI fuel gauge
9. Marshall Instruments LBB00100 Fuel Pressure Gauge Black
- 1.5″ Fuel Pressure Gauge, 0-100 PSI
- Stainless Steel Case and Bezel
- Black Dial, Red Pointer, Liquid Silicone Filled
- 1.5″ dial, 1/8″ NPT Center Back Connection
- Easy vent plug for accurate readings every time.
10. BETOOLL Pro Fuel Injection Pressure Tester Kit Gauge 0-140 PSI
- Dual Dial For Accurate Reading, With A 140 PSI /10 Bar Scale
- Deluxe Manometer Fuel Injection Pressure Tester Gauge Kit
- Set comes in a specially designed molded case to make storage easy and organized.
- A time saving quick coupler connection at the end of he gauge hose makes a speedy and efficient couple possible with most adapters.
- The included adapters, hoses and fittings cover all fuel injection systems and most cars and trucks world wide!