Best exhaust system for dodge challenger

ImageTitlePrice
1BORLA Cat-Back Exhaust System 140650BORLA Cat-Back Exhaust System 140650$1,414.53Buy on Amazon
2BORLA 140482 Cat-Back Exhaust System for Dodge ChallengerBORLA 140482 Cat-Back Exhaust System for Dodge Challenger$1,749.99Buy on Amazon
3Khaos Motorsports Active Exhaust Delete/Simulator Made In USA! (fits) Dodge Charger and Challenger 2015 2016 2017 2018 2019 2020 2021Khaos Motorsports Active Exhaust Delete/Simulator Made In USA! (fits) Dodge Charger and Challenger 2015 2016 2017 2018 2019 2020 2021$149.99Buy on Amazon
4Dual 3Dual 3″ Axle Back Exhaust Muffler Pipe Kit System Compatible With 15-21 Dodge Challenger R/T RT SRT8 SRT-8 5.7L/6.2L/6.4L V8$399.95Buy on Amazon
5Performance SS409 Stainless Steel Dual 3Performance SS409 Stainless Steel Dual 3″ Cat Back Exhaust Muffler System Kit Polished Tips Compatible With 2008-2014 Dodge Challenger SRT8 SRT 8 Coupe 6.1L/6.4L V8$499.95Buy on Amazon
6MagnaFlow Axle-Back Performance Exhaust System Race Series Kit 19218 - Designed for the 2015-2021 Dodge Challenger - 2.5in Main Piping, Quad Split Rear Exit, Polished Finish 3.5in Exhaust TipMagnaFlow Axle-Back Performance Exhaust System Race Series Kit 19218 – Designed for the 2015-2021 Dodge Challenger – 2.5in Main Piping, Quad Split Rear Exit, Polished Finish 3.5in Exhaust Tip$831.95Buy on Amazon
7Borla 140649 S-Type Cat-Back Exhaust System 2.25 in. Incl. X-Pipe Assembly/Mid Mufflers/Rear Mufflers/Clamps No Tip -Uses Factory Valance Single Split Rear Exit S-Type Cat-Back Exhaust SystemBorla 140649 S-Type Cat-Back Exhaust System 2.25 in. Incl. X-Pipe Assembly/Mid Mufflers/Rear Mufflers/Clamps No Tip -Uses Factory Valance Single Split Rear Exit S-Type Cat-Back Exhaust System$1,460.99Buy on Amazon
8Airaid Cold Air Intake System: Increased Horsepower, Superior Filtration: Compatible with Compatible with 2011-2019 CHRYSLER/DODGE (300, 300C, 300S, Challenger, Charger) AIR-353-210Airaid Cold Air Intake System: Increased Horsepower, Superior Filtration: Compatible with Compatible with 2011-2019 CHRYSLER/DODGE (300, 300C, 300S, Challenger, Charger) AIR-353-210$329.99Buy on Amazon
9Phinlion Super Bright 212-2 LED Bulb 3030 6-SMD Festoon 41mm 42mm 211-2 578 Bulbs for Car Interior Map Dome Trunk Courtesy Light, Green (4 Pack)Phinlion Super Bright 212-2 LED Bulb 3030 6-SMD Festoon 41mm 42mm 211-2 578 Bulbs for Car Interior Map Dome Trunk Courtesy Light, Green (4 Pack)$12.99 ($3.25 / Count)Buy on Amazon
10Flowmaster 817737 Exhaust System KitFlowmaster 817737 Exhaust System Kit$870.97Buy on Amazon

Best exhaust system for dodge challenger information

1. BORLA Cat-Back Exhaust System 140650

BORLA Cat-Back Exhaust System 140650
  • Product type :AUTO PART
  • Package dimensions :26.67 cm L x78.74 cm W x112.395 cm H
  • country of origin :United States
  • package weight :54.0lbs

View on Amazon

2. BORLA 140482 Cat-Back Exhaust System for Dodge Challenger

BORLA 140482 Cat-Back Exhaust System for Dodge Challenger
  • Country of Origin: United States
  • Package quantity: 1
  • Product type: Auto_Part
  • Package dimensions: 152.4 cmsLx39.37 cmsWx34.29 cmsH

View on Amazon

3. Khaos Motorsports Active Exhaust Delete/Simulator Made In USA! (fits) Dodge Charger and Challenger 2015 2016 2017 2018 2019 2020 2021

Khaos Motorsports Active Exhaust Delete/Simulator Made In USA! (fits) Dodge Charger and Challenger 2015 2016 2017 2018 2019 2020 2021
  • Fits 2015-2021 Dodge Chargers and Challenger With Active Exhaust
  • CNC Machined From 6061 Aluminum and Anodized Black to Prevent Corrosion
  • 15-20 Minute Install With All Hardware Included
  • Fits Aftermarket and OEM Exhaust
  • Made in Grand Rapids Michigan USA

View on Amazon

4. Dual 3″ Axle Back Exhaust Muffler Pipe Kit System Compatible With 15-21 Dodge Challenger R/T RT SRT8 SRT-8 5.7L/6.2L/6.4L V8

Dual 3
  • Fits: 15-21 Dodge Challenger & SRT8 6.2L/6.4L and 17-20 Dodge Challenger R/T 5.7L V8
  • High Performance Dual 3″ Axle Back Exhaust System, No Muffler. Quad 3.5″ Polished Stainless Exhaust Tips Included
  • Very Aggressive & Deep Muscular Exhaust Sound. Reduce Weight. Improve Sound, HP/TQ & Throttle Response
  • TIG Weld & Mandrel-Bent For Maximum Performance. Bolts, Gaskets, Hangers & Exhaust Clamps Included As Pictured
  • Top Quality SS409 Stainless Steel. Affordable Pricing. Instruction Not Included. Professional Installation Recommended

View on Amazon

5. Performance SS409 Stainless Steel Dual 3″ Cat Back Exhaust Muffler System Kit Polished Tips Compatible With 2008-2014 Dodge Challenger SRT8 SRT 8 Coupe 6.1L/6.4L V8

Performance SS409 Stainless Steel Dual 3
  • Retain All OEM Catalytic Converters. Does NOT Modify Any Vehicle Emission Component. Fully Emission Legal Exhaust System
  • Fit: 2008-2014 Dodge Challenger SRT8 6.1L & 6.4L V8. High Performance Dual 3.00″ Cat Back Exhaust System
  • Aggressive Exterior Sound Level & Moderate Interior Sound. Tube Diameter: 3.00″ Muffler Inlet/Outlet
  • Hardware(s) Included Exactly As Shown. Improve Sound, HP/TQ & Throttle Response. TIG Weld & Mandrel-Bent For Maximum Performance
  • Top Quality SS409 Stainless Steel. Affordable Pricing. Instruction Not Included. Professional Installation Strongly Recommended

View on Amazon

6. MagnaFlow Axle-Back Performance Exhaust System Race Series Kit 19218 – Designed for the 2015-2021 Dodge Challenger – 2.5in Main Piping, Quad Split Rear Exit, Polished Finish 3.5in Exhaust Tip

MagnaFlow Axle-Back Performance Exhaust System Race Series Kit 19218 - Designed for the 2015-2021 Dodge Challenger - 2.5in Main Piping, Quad Split Rear Exit, Polished Finish 3.5in Exhaust Tip
  • VERY AGGRESSIVE SOUND/RACE SERIES – The Race Series takes performance exhaust to racecar specification for when you want that fully unleashed straight-pipe experience. Engineered for power and straight-pipe sound, fast-flowing mandrel bent pipes with no mufflers decrease the overall system weight and enable that racecar exhaust tone. Check local laws to ensure compliance with noise regulations. Specifically designed for the 2015-2021 Dodge Challenger
  • AXLE-BACK PERFORMANCE – Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components behind the rear axle. These systems are 50-state legal and designed to enhance power and sound without replacing the entire original system
  • BOLT-ON INSTALLATION – MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation
  • STAINLESS-STEEL CONSTRUCTION – Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifetime of your vehicle
  • LIMITED LIFETIME CONSTRUCTION WARRANTY – Performance that lasts. Enjoy worry-free ownership knowing that you’re backed by MagnaFlow’s limited lifetime construction warranty

View on Amazon

8. Airaid Cold Air Intake System: Increased Horsepower, Superior Filtration: Compatible with Compatible with 2011-2019 CHRYSLER/DODGE (300, 300C, 300S, Challenger, Charger) AIR-353-210

Airaid Cold Air Intake System: Increased Horsepower, Superior Filtration: Compatible with Compatible with 2011-2019 CHRYSLER/DODGE (300, 300C, 300S, Challenger, Charger) AIR-353-210
  • INCREASES HORESPOWER: AIRAID performance air intake systems feature an aerodynamically-engineered intake tube, designed to accelerate airflow to your engine and reduce turbulence—helping increase your vehicle’s performance
  • SUPERIOR FILTRATION: AIRAID performance intake systems are engineered to provide a smooth, unimpeded path for airflow to your engine—keeping the air cooler and more oxygen-dense. Injecting more oxygen-rich air into the cylinders allows the engine to burn fuel more efficiently during combustion, offering you an increase in performance
  • EASY INSTALL: These simple-to-install, sophisticated systems help maintain proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go—and enjoy your vehicle’s horsepower gains
  • HIGH PERFORMANCE REUSABLE FILTER: Each AIRAID intake system is paired with a washable, reusable air filter designed to capture contaminants and provide top-quality engine protection
  • DRY FILTER MEDIA: Includes a dry synthetic SYNTHAMAX air filter that offers excellent airflow and exceptional protection from contaminants
  • MADE IN THE USA: All AIRAID intake systems are proudly made in the USA using the highest quality materials
  • NO-HASSLE LIFETIME WARRANTY

View on Amazon

9. Phinlion Super Bright 212-2 LED Bulb 3030 6-SMD Festoon 41mm 42mm 211-2 578 Bulbs for Car Interior Map Dome Trunk Courtesy Light, Green (4 Pack)

Phinlion Super Bright 212-2 LED Bulb 3030 6-SMD Festoon 41mm 42mm 211-2 578 Bulbs for Car Interior Map Dome Trunk Courtesy Light, Green (4 Pack)
  • (Pack of 4)Length: 42mm; Color: green; Working voltage: 10V~30V(fits 12V/24V vehicles); Current: 0.15A; Power: 1.8W/bulb; Lumen: 500lm/bulb
  • Features: non-polarity, built-in intelligent constant current IC driver for quality performance, aluminum heat sink for excellent heat dissipation, low power consumption, longer lifespan
  • Wide application: dome light, map light, trunk or cargo area light, interior door light, license plate light, luggage compartment light, reading light, stepwell light, glove box light, step/courtesy light, vanity mirror light etc.
  • Fit bulb sizes: 211, 212, 211-2, 212-2, 214-2, 560, 569, 578, 6411, 6413, 6429, 6451 etc. Easy to install, Canbus error free design, for 99% of vehicles, just plug and play
  • Warranty: ONE YEAR warranty. Please check AMAZON FITMENT NOTE or owner manual before placing an order.

View on Amazon

10. Flowmaster 817737 Exhaust System Kit

Flowmaster 817737 Exhaust System Kit
  • Stainless Steel Construction
  • Dyno Tuned For Maximum Performance
  • Patented Delta Flow technology
  • Made in the USA

View on Amazon